This project is a 1930 Model A Ford, 2 door coach.

The body has not been chopped.

Rear, vertical, body seams have been removed, seems welded and finished off.

Power window systems have been made up and the doors have bear claw latches.

The rear of the body was shortened about 3 ins. to allow the 32 tank to fit properly.

32 rad shell and SS grill insert.

I built the frame from 2X4 tubing on a home made frame jig.

The frame is model A from the front to the center of the rear quarter panels. From there back it is of 32 design. This allows the use of parallel Leif springs and puts the fuel tank out back. I will fabricate frame horn covers to fit this modification.

3 Ins. dropped front axle and Posie rear spring setup for a 32.

The engine is a 1995 4.3 V6 Chevrolet Vortec with 4 BBL.

Transmission is a 700R4

Rear end is S10 with 3:73 gears

Wheels are Americans, 14 X5 on the front, 15X8 on the rear.

Headers and plates are hand made stainless steel.

Brakes are chevelle disc front, S10 drum rear.

Master cylinder is corvette.

Corvette tilt, tel, steering.

Gauge package is Steward Warner

Sound system is Alpine.

Lokar shifter